Manufacturing Capabilities
Every machine we quote against, published as a register: 62 equipment items, 193 units and 14 inspection instruments.
new plant, 2026
full register below
bending capacity
8 dispatch checks
Five equipment groups, one route
The register is grouped the way the work flows: cutting and punching, bending and shearing, welding, tapping and press work, then coating and handling. A part normally touches three of these groups before it is packed.
Machine counts below are the figures from the plant asset register. Where the company profile and the register differ, the register is used and the difference is noted on this page.
Bending capacity. The bending area is counted as 21 press brakes and bending cells, including the robotic cell and the two-machine linked brake. That is the figure the production plan is scheduled against.
62 items · 193 units
Grouped as on the plant asset register. Counts are units in place, not rated capacity.
| No. | Equipment | Model | Maker | Qty |
|---|---|---|---|---|
| Cutting & punching · 7 items · 8 units | ||||
| 1 | Fiber laser cutting machine | HS-G4020AIV | Guangdong Hongshi | 1 |
| 2 | Fiber laser cutting machine | TKLG-4015AF | Beijing Tongkuai | 1 |
| 3 | Fiber laser cutting machine | TKLG-3015AD | Beijing Tongkuai | 1 |
| 4 | CNC turret punch press | HPI3058-36LA2 | Jiangsu Yawei | 1 |
| 5 | CNC turret punch press | HPI3058-36LA2 | Jiangsu Yawei | 1 |
| 6 | Conventional press | J21S-25T | Shandong Tengzhou | 2 |
| 7 | Conventional press | J21S-16T | Shandong Tengzhou | 1 |
| Bending, shearing & grinding · 15 items · 24 units | ||||
| 8 | Grinding machine | SSD1300 | Shandong Shengteng | 1 |
| 9 | Shearing machine | QC12Y-4/2500 | Anhui Yawei | 2 |
| 10 | Press brake | PBB160/4100 | Jiangsu Yawei | 1 |
| 11 | Press brake | PBB110/3100 | Jiangsu Yawei | 7 |
| 12 | Press brake | PBB80/2550 | Jiangsu Yawei | 1 |
| 13 | CNC panel bender | FBC-2516 | Jiangsu Yawei | 1 |
| 14 | Two-machine linked CNC press brake | 2-PBA-110/3100 | Jiangsu Yawei | 1 |
| 15 | Press brake | WC67K-63-2500 | Wuxi Haotong | 1 |
| 16 | Robotic bending cell | PBC110/3100FMC | Jiangsu Yawei | 1 |
| 17 | Bending cell | PBC110/3100 | Jiangsu Yawei | 1 |
| 18 | Press brake | WC67K-40-2000 | Wuxi Haotong | 1 |
| 19 | Press brake | PBA60/2050 | Jiangsu Yawei | 1 |
| 20 | Press brake | TPM8060/2050 | Jiangsu Jinfangyuan | 2 |
| 21 | Press brake | JM-ESP35-1250 | Shandong Jingmei | 2 |
| 22 | Press brake | PBA-11/3100 | Jiangsu Yawei | 1 |
| Welding · 11 items · 119 units | ||||
| 23 | Arc welding machine | BX1-315 | Foshan Aoge | 1 |
| 24 | Spot welder | DN-25 | Hengshui Zhouwo | 1 |
| 25 | Spot welder | GM-38 | Hebei Guomei | 4 |
| 26 | Butt welder | PHJ-001 | Hebei Kexin | 2 |
| 27 | TIG welder | WS200S | Shenzhen Ruiling | 36 |
| 28 | MIG welder | NBC-250GF | Shenzhen Ruiling | 40 |
| 29 | Robotic welding machine | YD-ACD35 | Panasonic, Japan | 2 |
| 30 | Plasma welder | LGK-63 | Shanghai Dongsheng | 1 |
| 31 | Welding station | JG-1225 | Hebei Jinggong | 27 |
| 32 | Hand-held laser welder | SGJGH | Qingxian Liushi | 4 |
| 33 | Roll welder | POC-2800 | Shanghai Pochuang | 1 |
| Tapping, drilling & press work · 23 items · 32 units | ||||
| 34 | Screw tapping machine | RSR-4500 | Tianjin Zhonghuan | 2 |
| 35 | Screw tapping machine | RSN-1600 | Tianjin Zhonghuan | 1 |
| 36 | Screw tapping machine | RSR-6000 | Tianjin Zhonghuan | 1 |
| 37 | Metal circular saw | YJ275S | Jiangsu Hefeng | 1 |
| 38 | Bevel cutting machine | JIX-FF-255 | Jiangsu Dongcheng | 1 |
| 39 | Riveting press | H518 | Shenzhen Haiji Technology | 4 |
| 40 | Riveting press | 818 | Qingxian Zhantong | 5 |
| 41 | Air compressor | YMF15-16C | Ningbo Baosi | 1 |
| 42 | Air compressor | YMF22-16 | Ningbo Baosi | 1 |
| 43 | Air compressor | DE-D-15+ | Jiangsu Desnail | 1 |
| 44 | Air compressor | BMF-15-10 | Ningbo Baosi | 1 |
| 45 | Air compressor | PMVF002 | Zhejiang Kaishan | 1 |
| 46 | Drilling machine | ZQ4116 | Zhejiang Xiling | 2 |
| 47 | Drilling machine | ST-16A | Zhejiang Xiling | 1 |
| 48 | Tapping machine | D4112 | Fuzhou Gongda | 1 |
| 49 | Tapping machine | MODELSWJ-12 | Zhejiang Xiling | 1 |
| 50 | Drill-tap machine | ZS4116 | Zhejiang Xiling | 1 |
| 51 | Tapping machine | SWJ-12 | Zhejiang Xiling | 1 |
| 52 | Radial tapping machine | ZBGS-001 | Zhejiang Zhenbao | 1 |
| 53 | Suspended tapping machine | SKXFGS P1 | Shijiazhuang Lishida | 1 |
| 54 | Air compressor | W/V-0.25/0.8 | Shanghai Quincy | 1 |
| 55 | Air compressor | V-0-25/8 | Shabo Pneumatics | 1 |
| 56 | Shearing machine | QA32-8B | Hebei Ruijunbao | 1 |
| Coating, lifting & material handling · 6 items · 10 units | ||||
| 57 | Overhead crane | LDA5-18.9A3 | Henan Mine | 2 |
| 58 | Powder coating line | XCY-108 | Shenzhen Xichuangyou | 3 |
| 59 | Curing oven | XCY-108 | Shenzhen Xichuangyou | 1 |
| 60 | Forklift | CPCD | Anhui Heli | 2 |
| 61 | Forklift | CPC | Anhui Heli | 1 |
| 62 | Pallet stacker | CDD12 | Anhui Heli | 1 |
What the eight dispatch checks are measured with
Fourteen instruments are listed in the plant register. Checks without a dedicated instrument are marked as pending rather than given an invented model.
| No. | Instrument | Model | Maker | Used for |
|---|---|---|---|---|
| 1 | Salt spray test chamber | WY-60A | Dongguan Huiyuan | Salt spray corrosion test |
| 2 | Colourimeter | A-6835 | BYK, Germany | Surface colour difference |
| 3 | Rockwell hardness tester | HR-150A | Laizhou Rockwell | Material hardness |
| 4 | Micro-ohmmeter | GOM-801H | GW Instek, Suzhou | Coating resistance |
| 5 | Coating thickness gauge | DUALSCOPE MPOR | Fischer, Germany | Film thickness |
| 6 | Gloss meter | A-4460 | BYK, Germany | Surface gloss |
| 7 | Cross-cut adhesion tester | A-5120 | BYK, Germany | Coating adhesion |
| 8 | Pencil hardness tester | Ref720N | SHEEN, UK | Silkscreen hardness |
| 9 | Dial torque wrench | 120TMK | KANON, Japan | Riveting torque |
| 10 | Feeler gauge | 100B 17 | — | Gap measurement |
| 11 | Impact tester | — | — | Impact performance |
| 12 | Thread ring gauge | — | — | Thread inspection |
| 13 | Spirit level | — | — | Flatness / level check |
| 14 | Height gauge | — | — | Height dimension |
Inspection is a step in the route, not a final gate
Eight checks are scheduled into production. Records are kept against the order number, so a question six months later can be answered from the file.
- 01
Incoming material inspection
Sheet thickness, grade and surface are checked against the order before the material enters the store.
- 02
In-process inspection
First-piece approval at each operation; the operator checks the setting before the run continues.
- 03
Dimensional inspection
Critical dimensions checked against the drawing at the bench and on the CMM-free gauges listed in capabilities.
- 04
Welding inspection
Weld size, penetration and appearance checked on the frame; robot programs are verified on the first part.
- 05
Surface finish inspection
Colour, gloss, hardness, coating thickness and adhesion checked with BYK and Fischer instruments.
- 06
Assembly inspection
Door alignment, hinge position, hardware torque and wiring routes checked before the unit leaves the bay.
- 07
Final quality inspection
Eight dispatch checks per unit or batch, recorded against the order number.
- 08
Packaging inspection
Protection, labelling and pallet condition checked before the consignment is closed.
Production data on the shop-floor screen.
Inspection results for the same orders.
Certifications. The company profile supplied for this website does not list ISO or other third-party certificates. We therefore do not display certification marks. If certificates are available, they can be added here once the numbers and scope are confirmed.
What we ask before we quote
A drawing or a sample, the material and the quantity are enough to start. We review manufacturability, flag anything that will not repeat, and confirm the process route before price.
- 2D drawing (PDF, DWG, DXF) or 3D model (STEP)
- Material, thickness and finish
- Quantity and delivery target
- Inspection or packaging requirements
Material is checked against the order before it enters the store.